Leading Custom Drawer Handles Suppliers in China

Drawer Handles

Drawer handles can be an excellent thing to have, and there are a lot of different types and styles to choose from. They really help to give a polished look to cabinets and furniture. They can be made from a number of different materials too. This article will look at the different drawer handle materials that are available and give some suggestions for using them.

Depending on the piece of furniture, drawer handles are available in a variety of styles and sizes. For example, there are desk drawer handles, and chest drawer handles, cabinet drawer handles, bedroom drawer handles, kitchen drawer handles, dresser drawer handles, etc.

Using drawer handles is the easiest way to open and close these drawers. However, as important as it is to hold handles in your drawers, drawer handles also serve other purposes.

When purchasing a new piece of furniture with drawers, selecting the right furniture drawer handles is critical. First, learn what materials were used to make the drawer handles you prefer. At Oubeehandle, we produce both replacement drawer handles and new ones made of various raw materials.

Drawer handles are available in a variety of materials, including:

• Drawer pulls, and knobs are made of brass.
• Drawer pulls made of metal
• Ceramic drawer handles

The materials used to manufacture Oubee drawer handles are aluminum alloy drawer handles, zinc alloy drawer handles, and stainless steel drawer handles.

Oubeehandle‘s drawer handles are available in a variety of styles and sizes. They range from large to small. You can choose the type and dimensions of drawer handles based on your preferences.

Can I use drawer cabinet handles of a specific size and style? You don’t need to worry about where to buy drawer handles because Oubeehandle manufactures custom and standard handles for cabinets and drawers.

The appearance of drawer handles is determined by the finish that you choose. You can choose from several finishes, including oxidized black, matte, pewter, chrome, nickel, and antique drawer handles. Pick what you like!

At Oubeehandle, we specialize in drawer handles, and we strive to produce the highest quality products. If we can be of assistance in any way, we are always willing to do so.

5 Easy Steps To Select The Right Drawer Handles For Your Cabinet

Drawer Handles for Oak Furniture

Updating a home with a lot of oak can be a real task. Cabinetry for the kitchen is a good example of this rule being particularly relevant to your needs. Instead of spending so much money on changing the entire space, it is wiser to consider the installation of cabinet knobs.

Any hardware makes a huge difference in the aesthetic of the room and the bones of the cabinets. Remember to switch out the accessories when you’ve painted it a more lively color, cleaned the counters, and laid down a new rug. Direct your attention to handles made of entire plastic, overly elaborate, decorated, brass and ceramic inlays

Chest of Drawer Handles for kids’ Rooms

Drawer handles are not exclusively utilized in furniture for grownups. They are also used in children’s cabinets. It can be difficult to select cupboard handles for your kids as a parent. Choose handles with a child-friendly design. The style that they adopt should be original. And they should be vibrant.

Durability, size, shape, and cost are all important considerations, as is the overall aesthetic of the final product. Your option should also be free from dangerous materials for your children’s safety and comfort. Moreover, depending on a trustworthy organization like Oubeehandle should also be your priority. We can assist you from beginning to end because of our team’s adaptability and versatility. We are the handle manufacturer you can rely on no matter where you are in your journey.

Office Drawer Handles

Does your office have cabinets that lack personality? Do you have a drawer that has an unpleasant interior design, perhaps? Renovate your office for any reason. How are you going to do that? Simply repaint the space, clean the furniture, and replace drawer handles—select robust, unique, cheap, or long-lasting knobs. There is a difference, even though it is not a major upgrade. In terms of the environment, design elements will help you feel more energized and productive, as well as more competitive.

A Comprehensive Guide To Drawer Hardware Placement

After selecting where you want to utilize your drawer handles, whether in the workplace, bedroom, dresser, or children’s furniture, now is the correct time to know about hardware placement. You may think that the process simply requires common sense. However, that is not the case. An enjoyable voyage requires knowledge of the essentials.

Handles for upper drawers can be positioned above or below the face frame, depending on your preference. It’s also possible to put them inside the face frame of the mask. For the base drawers, set the knobs above the center mark for a balanced or modern design. For 24-inch or broader cabinetry, install two knobs. When you wish to utilize pulls, they should be roughly 1/3 width of the furniture. For example, using an 8-inch pull on a 24-inch drawer is a wonderful idea.

Other Fun and Effective Tips

• If you are constructing your space from scratch, it is best to use inset cabinetry where doors and drawers seal flush with the face frame opening. In contrast to other styles, it gives your kitchen furnishings a sleek and smooth appearance.

Installed cabinet accessories should have a balanced appearance, of course. Handles should be around 1/3 of the drawer width. For example, when your drawer measures 12 inches, take advantage of a 4-inch pull. Use the 14-width pull if you want a shorter draw over the longer ones if you prefer a longer one.

• If your cabinetry is inset, do you consider the drawer width or the actual cabinet width? Following the drawer’s width is a good rule of thumb. Due to this, you won’t have to worry about creating minuscule gaps in your work. It is, therefore, crucial to center the hardware within the frame.

On drawers with a width of at least 24 inches, use two knobs. Divide the drawer frame width into thirds before installing. And place the knobs of your choice to the left or right marks.

• For your shaker-style cabinets, you may install a drawer knob within or outside the frame.
• When placing drawer knobs on the corner of the face frame for cabinets, merely leave 2 1/2 inches of space between the bottom and top.

Proper Placement For Drawer Handles

If you want to give your furniture some new life, you have to replace the hardware. It is a smart alternative for repairing drawers. Then, just tie your cabinetry into the rest of your home décor by picking attractive handles with design features and complementary finishes.

A wide variety of materials, designs, and sizes are used to create drawer handles. A variety of hardware is also required. Therefore, you must make sure you use the correct tools, drill bits, and screws for drawer handle placement.

A lot of people find drawer handle positioning uncomplicated. But, in your situation, you can expect a different experience when you are unaware of how to make the procedure correct.

The following are other tips to consider:

1. Mark the center of the drawer: Before determining and marking the vertical center of the drawer, prepare a tape measure ahead of time. Again, seek guidance from someone if necessary to avoid expensive blunders. Aside from that, apply a strip of tape to help you join the two marks. Your handle placement will be guided by this tape.
2. Hold up the drawer handles in line with the center guide. With this method, you can determine how and where the knobs should be placed. However, the distance may differ. It depends on the shape or type of your cabinet hardware. Just be sure to place them equally on the face of your cabinets.
3. Don’t forget to mark and drill the holes: Right after defining the expected position of your drawer handles, mark the top spot using a pencil. Drill a hole for the pull’s hardware and find the vertical and horizontal dimensions of this position from the drawer sides with the assistance of an L square. Whatever the outcome, use it to indicate the precise placement of the drill points on the other drawers. Use it.
4. Use Hardware to Secure Drawer Handles 4. To secure the drawer handles to the drawer or drill holes for the knobs, apply the most appropriate screws. Always note that the operation includes tightening with a bolt.

Indeed, apply the placement strategy on kitchen drawers. Measure and mark the cabinets before drilling. If you are not certain about your employment, do not hesitate to rely on a competent company near you.

How To Install Handles On Drawers?

So, are you now aware of the right positioning of drawer handles? The next step would be to learn how to install doorknobs in the cabinets. Have you ever thought about using drawers without handles? Despite the sleek and basic appearance of your choice, you should be prepared to encounter some difficulties. Using this chapter, you can install drawer handles with comfort when you’ve been reaching for straws for months.

To get started, here are the materials you need:

• Drawer handles, pencil
• Ruler & drill bit \s• Small screw & hammer

Step 1: Before you begin, set down a cloth or newspaper to collect flying debris. After that, measure the spot where you like your drawer pull to go using a ruler. You may want to center it or slightly offset it. One of the greatest methods to get a feel for what a drawer handle will look like is to ask a cousin or a friend to hold it up. Just step back and then gaze from a decent distance.

Step 2: After you’ve marked where the screws will go, use a drill bit to make a pilot hole. A nail must be tapped into the right spot with a hammer. Make sure that the nail goes in deep, but it should not be so far, penetrating thru the opposing side—the hole assists to keep the wood from splintering and fracturing. As a plus, drilling won’t be time-consuming or demanding. It is going to be easy than we thought.

Step 3: Next, you need to place the drill bit into your drill.If you are not convinced regarding the size of the drill bit to utilize, place alternative sizes into the hole of your drawer handle. In most cases, it’s best to use the tool that’s already there. Most handles will require you to use a 3/16 or 5/32 drill bit. Always remember that if you drill a too-small hole, it is feasible to make it larger. But you cannot make a vast hole small. The moment you put up your drill bit, drill your hole. Repeat the method in case your handles have many screws.

Step 4: After that, put the screw into the hole. And next, thread it into your handle. Use a screwdriver to tighten it. Avoid over-tightening as this might cause unnecessary pressure and other consequences. If possible, have someone assist you.

Step 5: Make a complete clean-up of the resulting mess. The drawer handle is already installed. After that, you may be satisfied with your work.

Drawer Handles: Care and Cleaning Advice

Drawer handles need to be cleaned and oiled regularly after they are installed. Even if they look clean, there is dirt and rust unseen to the sight. Grease and scratches are sure to find a home on your new kitchen cabinet drawer knobs. Keep them clean daily to extend their lifespan and keep the expense of replacement low.

Follow the procedures below to make the cleaning process right:

Avoid Using Sharp or Abrasive Objects.

Cleaning or caring for cabinet accessories made from brass or bronze is not that demanding. Just remember to handle them with care at all times. Accidents do happen in the kitchen, of course. Keeping sharp equipment, such as peelers and knives, away from the hardware is typically not difficult. The likelihood is that you will occasionally come into contact with potentially hazardous materials.

Other pointy objects to watch out for are those made of metal, such as wedding rings. Drawer handles can become damaged if they are exposed to metal objects for an extended period. High costs of replacement are another factor to consider.

You should use your fingertips or the pads of your fingers when opening drawers. Don’t grasp the handle with your fingers. You can already open your furniture easily by hiding behind the pull. The same goes for your home appliances. Simply reach in with your fingers and gently pull, taking care not to damage your jewelry while doing so.

Don’t Ever Make Use of Harsh Chemicals Like Soaps or Cleaners.

Perhaps the most important requirement is that the drawer hardware should not be exposed to any chemical agents of any kind. Most manufacturers recommend that you can apply furniture polish to clean your handles. However, some people recommend using soap and water-soaked towels instead. Some also advocate the use of specialized cleaning agents.

No matter which one you choose, it won’t be secure for your computer. High wax content is a common feature of many polishes. As a result, your knobs will become clogged and less appealing. Even natural essential oils, such as orange oil, contain acid, which can significantly damage your investment if not used correctly.

Most homeowners feel that mild dish soap would be a safe solution to clean brass door handles. But, it is not always the genuine scenario. Any soap could damage your drawer hardware. This includes everything from mild soaps to abrasive kitchen scrubbers.

Soaps can be thought of as acid derivatives of a wide variety of kinds. And as indicated previously, a large number of acids in a solution can dissolve or even separate the lacquer coating. Consequently, the core metals will wear out over time.

Lacquer can also be dissolved by the use of other cleaning solutions that are specifically formulated for the purpose of cleaning products. If you are planning to clean your handle to wash residue or grease away, then remove it first from the furniture. This is one of the greatest ways to keep your investment durable and appealing over the years. Never use a power tool throughout the process. This will ensure that the attachment gets a lifetime use. In addition, keep degreasers and wood cleaners away from your doorknobs.

What is your plan for maintaining the cleanliness of your hardware? Anyone can learn the appropriate maintenance of cabinet accessories. For example, metal handles for drawers are stress-free to clean. To clean the handle, simply use a clean, damp towel to wipe it down. Then, moisten the rug with water.

Bronze and brass are alloys of copper. The latter is combined with zinc, whereas the former consists of tin. Since both of them contain copper, they are anti-microbial. Copper has been exploited for ages to withstand the growth of bacteria, viruses, molds, and fungi. It’s also been studied as a great anti-microbial surface agent recently.

Since these substances kill germs effectively, your problem is getting rid of the accumulated filth and grime. Wash your hardware to keep it clean. But it won’t happen right away. It will take time. Despite this, you can rest assured that your handles will last for many years.

How to take care of Stainless Steel and Zinc Drawer Handles

Zinc has anti-microbial effects. The effects of zinc supplementation on these compounds have been thoroughly investigated. Experts nonetheless encourage you to apply a wet towel when washing the handles.

Similar to your stainless steel tableware, stainless steel hardware can be cleaned with dish soap more successfully. But let it dry soon to minimize any issues like water-spotting. A warranty does not cover the use of soaps in any drawer hardware. In addition, stainless steel is considered a core material, not a plated finish. Therefore, the component can protect itself from the impacts of powerful cleaning solutions.

Common Mistakes In Cleaning Your Cabinet Hardware

Using water to clean dirt and rust in drawer handles is useful. However, when you’re always making mistakes, you’re not going to get the most out of a clean, damp towel.

Here are some common mistakes you may make when cleaning your hardware:

• Let your handle dry more quickly: After washing your drawer attachment, let it dry promptly to minimize water-spotting and other damages.
• During servicing, remove your rings and bracelets: They may create damages such as scrapes that you cannot afford to endure. You can wear gloves if necessary. And trim your nails ahead of time.
• Mixing with cleaning chemicals: Household cleaners employ a strong blend of chemicals to remove stubborn deposits and stains. However, when blended wrongly, they could impair the longevity of your investment and pose health hazards.

If you have been using bleach and vinegar, the latter solution will suffice. Next, remove the cleaning solutions that contain ammonia, hydrogen peroxide, and similar strong compounds.

• Cleaning from side to side or bottom-up may seem insignificant. However, it is important to clean drawer handles in the correct direction to ensure a sparkling surface. Improper cleaning can impair its lively and elegant appeal.
• Putting off cleaning. Cleaning should not be a high priority. To avoid a more difficult and time-consuming clean-up, don’t put off cleaning for too long. This is true with the hard-to-reach & smaller furniture items. Dirt can be drawn to areas with a lot of buildup, grease, and discoloration over time.

The solution is to make a calendar concerning maintenance. Dividing up to-dos into parts will decrease tension. It will also ensure a consistent and error-free cleaning process. In addition, it ensures that all of your drawer knobs are properly cared for.

• Not cleaning drawer handles well: Dor knobs are a commonly overlooked source of gems. Ignoring to clean out all these spots will increase the spread of infections such as colds and flu. To prevent the spread of germs, keep sanitary wipes on hand in the kitchen and bathroom. You can put hygienic and anti-microbial draws in your space too. Copper is the greatest metal to use. They have anti-bacterial capabilities that can prevent the formation of mold and fungus.

Conclusion

Having robust handles on your drawers will let you forget the essential and regular maintenance. Sometimes, you may assume that cleaning these small cabinet accessories is not important, but ultimately, you will come to the point of realizing that regular maintenance is imperative. And all that you know is that it’s already too late; therefore, the most effective thing to do is to replace them. Oubeehandle is prepared to assist you in your search for a new handle manufacturer or supplier.

From years of experience, excellent customer service, a vast array of alternatives, to competitive rates, we are a one-stop drawer handle manufacturer for you. As a result of our adherence to high manufacturing standards, we are able to provide our customers with items of the highest possible standard. Please feel free to contact us at any time of day or night with questions or concerns.

We are here 24/7 to handle all your problems and demands! Be one of our delighted clients today. Our employees are dedicated to making your experience with us as pleasant as possible by providing you with excellent customer service. We found the best assortment of drawer handles!

If you require any other information, please do not hesitate to get in touch with us.